Easy step-by-step instructions

Step 1: Use the cleaning agent (# 4) to remove grease, dust or makeup residue. Make sure your eyelashes are dry after this step.

Step 2: (Optional) If necessary, apply a protective sheet under the eye to protect the skin from the permanent agent.

Step 3: Coat the inside of the silicone cushion with False Lashes Glue. Lean your head back and attach the silicone cushion to the eyelid close to the lashes. Hold the cushion against your eyelid with your fingers for 30 - 60 seconds.

Step 4: Apply the glue to the outside of the silicone cushion. Tip: For the glue to adhere better, wait 30 seconds after application before folding the lashes.

Step 5: Bring your lashes back onto the cushion using the "Y" brush, then cover the surface with plastic * for about 1 minute.

Step 6: Apply the permanent agent (white bottle - # 1) to the lashes and cover with a plastic *. Leave on for 8 to 12 minutes.

Step 7: Remove excess product if necessary. Then apply the fixing agent (blue bottle - # 2) to the eyelashes and cover with a plastic *. Leave on for 8 to 12 minutes.

Step 8: Use the cleaning lotion (# 4) to remove the residues of permanent agent. Remove the silicone cushion.

Step 9: Finally, apply the nourishing lotion (yellow bottle - # 3) on your eyelashes.

    * The use of plastic is not necessarily necessary. We only included it for "rebellious" lashes. In 98% of cases, plastic is not necessary.
    In case you should use it: Plastic is not specific, you can use those found in large areas.

    Tips and tricks to get a better result:

    Before use:

    Use an eyelash curler - it will help your eyelashes to fold more firmly onto the silicone pad.
    Choose a medium or large silicone cushion depending on the curvature you want.
    During use:

    Apply glue to the silicone cushion - it will allow the cushion to adhere better to the eyelid.
    Add any excess glue to the tips of the lashes rather than their base - applying glue to the base could prevent effective penetration of the permanent agent.
    Place the permanent agent at the base rather than on the tips of the lashes to avoid possible “frizz”.
    The glue does not hold well on my eyelashes / pads, why?

    Several factors such as heat and humidity can have a negative impact on the adhesive. We recommend that you apply it only in a dry place and not too hot.

    It is also possible in rare cases that the glue may have a defect. To find out, put a little glue on the top of your hand. Wait 6 seconds then touch the sticky surface with your finger, try again 4 seconds later, then 4 seconds later. The glue should work and stick more and more with each touch. If after this test you find that the glue still does not work, please contact us directly via our contact form.